Filter
Top Products
IntroductionConnecting
your Monitor
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
AppendixIndex
10
(E) 65HC15
Connecting a cable converter box and VCR
This connection allows you to watch basic and premium cable
channels and watch video tapes.
To watch basic and premium cable channels, put the monitor in
VIDEO 1 mode and set the VCR to channel 3 or 4 (whichever
channel is vacant in your area), and use the converter box to change
channels.
You will need:
• two coaxial cables
• one set of standard A/V cables
IN from ANT OUT to TV
CH 3
CH 4
VIDEO
AUDIO
LR
IN
OUT
OUT 1
IR
OUT 2
INOUT
Cable converter box
Stereo VCR
Note:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have a VCR with S-video, use an S-
video cable (in the S-video terminals) instead
of a standard video cable. Do not connect a
standard video cable and an S-video cable to
Video-1 (or Video-2) at the same time, or the
picture performance will be unacceptable.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under Copyright
Law of the United States and other
countries, and may subject you to civil
and criminal liability.
From cable
Monitor
#01E_08-17_65HC15 5/20/05, 4:22 PM10
Black