Filter
Top Products
IntroductionConnecting
your Monitor
Using the
remote control
Setting up
your Monitor
Operating your
Monitor
AppendixIndex
11
(E) 65HC15
From
Antenna
From
Satellite
Dish
Connecting a DVD player or satellite receiver
and a VCR
This connection allows you to watch DVD/satellite and VCR.
You will need:
• one (or two, if satellite receiver is used) coaxial cable
• one set of standard A/V cables (between the monitor and VCR)
• one S-video cable (between the monitor and DVD player/satellite
receiver)
• one pair of standard audio cables (between the monitor and DVD
player/satellite receiver)
IN from ANT OUT to TV
CH 3
CH 4
VIDEO
AUDIO
LR
IN
OUT
VIDEO
OUTOUT
S-VIDEO
AUDIO
OUT
L
R
IN from ANT
VIDEO
OUTOUT
S-VIDEO
AUDIO
OUT
L
R
OUT 1
IR
OUT 2
Stereo VCR
Note:
For the highest possible picture quality from a
DVD player or satellite receiver without
component video or HDMI, use an S-video
cable. (If your DVD player has component
video, see page 12. If your DVD player or
satellite receiver has HDMI or DVI, see page
15.)
Do not connect both an S-video cable and a
standard video cable between the monitor
and DVD player/satellite receiver at the same
time or the picture performance will be
unacceptable.
Do not connect the DVD player/satellite
receiver and VCR to the same set of Video
inputs on the monitor. (See the illustrations,
which show the DVD player/satellite receiver
connected to Video-1 on the monitor, and the
VCR connected to Video-2 on the monitor.)
Monitor
DVD player
Satellite receiver
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under Copyright
Law of the United States and other
countries, and may subject you to civil
and criminal liability.
#01E_08-17_65HC15 5/20/05, 4:22 PM11
Black