Filter
Top Products
E6581371c
- 13 -
5. Specifications
< Environmental specification >
Item Specification
Service environment Conforms to VF-FS1
Operation temperature Conforms to VF-FS1
Storage temperature
-25 to +65℃
Relative humidity 20 to 93% (free from condensation and vapor)
Vibration 5.9m/s
2
(0.6G) or less (10 to 55 Hz) (To be complied with JIS C0040.)
< LONWORKS communication option (LIU007Z) side >
Item Specification Note
Applicable
model
VF-FS1
Only one board connection is
available.
Communication
method
MODBUS-RTU
Baud rate 19200bps
Commun
ication
between
inverter
Parity Even number
Set the inverter parameter
(refer to section 3.2)
Control power supply 5 V
DC
Supplied from inverter
Logic input terminal
2 circuits (F,R)
Slide switch (SW1) enable to select
logical configurations (Source/Sink).
Not isolated
Logic output terminal Nothing
Relay contact output
terminal
1 circuit (FL): 30V
DC
-0.5A
250V
AC
-1A (cosφ =1
250V
A
C
-0.5A (cosφ =0.4)
Isolated
Analog input terminals 1 circuit (VIB): 10V
DC
(R
IN
= 30kohm) Not isolated
Analog output terminals Nothing
Power supply output 24V
DC
-50mA Current limit function
< Network side >
Item Specification Notes
Transceiver
Channel type
TP/FT-10 type
(Free topology transceiver
78kbps
ANSI/EIA/CEA 709.3
Communication signal 2 wires plus shield NETA, SHLD, NETB
Transmission distance
(Free topology)
Between devices: 400m at maximum
Total cable length: 500m at maximum
When recommended cable is used:
Level 4/22AWG
Transmission distance
(Bus topology)
Total cable length: 1400m at maximum
Stub length: 3m at maximum
When recommended cable is used:
Level 4/22AWG
Number of connected
nodes
Free topology 63 nodes at maximum
Because a host and routers are
counted as one board, the option can
be connected up to 63 nodes.
Protocol LonTalk ANSI/EIA 709.1
Address and related
items
Number of domains: 2
Number of address entries: 37
Number of alias tables: 8
Network variables
Number of transmission data: 17
Number of receiving data: 8
Number of configuration property: 12
L
ONMARK Variable Speed Motor Drive
functional profile.
Service pin Mechanical switch (SW2)
Used for notification of Neuron ID to
the host.
Terminal block Detachable terminal block 3-pole
Applicable terminal block
Manufacturer: PHOENIX CONTACT
Type-Form : MSTB 2,5/3-ST-5.08