Filter
Top Products
43
TMP19A43FZXBG
TX19 Series single-chip microcontroller with NANO FLASH
TM
TMP19A71
TX19 Series single-chip microcontroller with ROM/RAM
Single-chip 32-bit RISC microcontroller for inverter control
Single-chip 32-bit RISC microcontroller for real-time control
Under
development
Under
development
● Internal ROM: Flash 384 Kbytes
● Internal RAM: 20 Kbytes
●
Sequential conversion type 10-bit AD converter:
16 channels (conversion time 1.15 µs)
● 8-bit DA converter: 2 channels (2.5 V)
● 32-bit timer counter: 1 channel
Output compare register: 8 channels
Input capture register: 4 channels
● 16-bit timer counter: 16 channels
(Four of the 16 channels are used for a
dual-phase pulse input counter)
●
UART/SIO: 4 channels
(One of the four channels is used for I
2
C/SIO)
● UART/HSIO: 3 channels (10 Mbps)
● DMAC: 8 channels
● ROM correction: 1 word x 8 blocks
8 words x 4 blocks
● Key-on wake-up: 32 channels
● External interrupt: 48 channels
● Operating temperature: -20 to 85
o
C
● Maximum operating frequency:
40 MHz (PLL multiplication)
● Internal supply voltage: 1.35 to 1.65 V
ADC, I/O supply voltage: 2.7 to 3.6 V
● Package: 193-pin FBGA
(12 x 12 mm, 0.65-mm pitch, 1.2-mm thick)
The TMP19A43 is a 32-bit RISC microcontroller based on the
TX19A core and containing NANO FLASH™, a high-speed AD
converter, a large number of external interrupts, and timer/counters.
The microcontroller features low-voltage and low-power-consumption
operation, making it ideal for battery-driven applications such as
portable information equipment for personal use.
CPU
TX19A Core
Clock Generator
16-ch 16-Bit Timer
1-ch 32-Bit Timer
Interrupt Controller
7-ch
Serial Interface
16-ch
10-Bit AD Converter
2-ch
8-Bit DA Converter
8-ch
DMA Controller
Watchdog Timer
Key-on Wake-up
RAMROM
ROM
Correc-
tion
Debug
Support
Unit
The TMP19A71 is a single-chip 32-bit RISC microcontrol-
ler, which integrates major features for controlling home
electric appliances, including motor control. It is based
on the TX19A
core, an enhanced version of the
TX19
core,
which incorporates
high-speed ROM and RAM. The
TMP19A71 is ideal for controlling home electric applian-
ces that require energy saving or low vibration/noise.
● Internal ROM
TMP19A71CYUG/FG:
Mask ROM, 256 Kbytes
TMP19A71FYUG/FG:
Flash EEPROM, 256 Kbytes
● Internal RAM: 10 Kbytes
●
3-phase PWM output: 2 channels
Resolution: 35.7 ns (16 bits)
Dead time insertion
Output stop on failure
●
Incremental encoder input: 1 channel
● 10-bit AD converter: 2 units
Analog input: 8 channels + 11 channels
Conversion time: 2.36 µs/channel
Start synchronization with PWM cycle or timer
● DMA controller: 8 channels
● Interrupt controller:
10 external sources
● 16-bit timer/counter: 4 channels
● Serial interface
UART: 2 channels
UART/SIO: 2 channels
● Watchdog timer
● I/O ports: 75 pins
● ROM correction: 8 areas
● Maximum operating frequency:
56 MHz
● Supply voltages:
TMP19A71CYUG/FG:
Internal 1.35 to 1.65 V
I/O 3.0 to 3.6 V
TMP19A71FYUG/FG:
Internal 2.3 to 2.7 V
I/O 3.0 to 3.6 V
● Package: 100-pin QFP
TMP19A71CYUG/FYUG:
14 x 14 mm, 0.5-mm pitch
TMP19A71CYUG/FYFG:
14 x 20 mm, 0.65-mm pitch
CPU
TX19A Core
Clock Generator
4-ch 16-Bit Timer
2ch PMD
2-Unit 10-Bit
AD Converter
4-ch Serial Interface
Interrupt Controller
1-ch Encoder
8-ch DMA Controller
Watchdog Timer
7 MHz
Timer Output
Timer Input
PWM Output
Encoder Input
Analog Input
SIO/UART
Interrupt
Input
RAMROM
ROM
Correc-
tion
EJTAG
+
PC trace