Filter
Top Products
-101-
4.8.1.2 Login Parameter
On this page, you can configure and modify the Web and Telnet port.
Choose the menu Maintenance→Admin Setup→Login Parameter to load the following page.
Figure 4-61 Login Parameter
The following items are displayed on this screen:
¾ General
Web Management Port:
Enter the Web Management Port for the router.
Telnet Management Port:
Enter the Telnet Management Port for the router.
Web Idle Timeout:
Enter a timeout period that the router will log you out of the
Web-based Utility after a specified period (Web Idle
Timeout) of inactivity.
Telnet Idle Timeout:
Enter a timeout period that the router will log the remote
PCs out of the Web-based Utility after a specified period
(Telnet Idle Timeout) of inactivity.
Note:
● The default Web Management Port is 80. If the port is changed, you should type “http://IP address:
port” to login the router. E.g.: If the Web Management Port is changed to 88, type
http://192.168.0.1:88 in the address filed to login the router.
● The new timeout period will take effect when next login.
Application Example
Network Requirements
Allow the IP address within 210.10.10.0/24 segment to manage the router with IP address of
210.10.10.50 remotely.