TP-Link AC1900 Network Router User Manual


 
Archer C1900 AC1900 High Power Wireless Dual Band Gigabit Router
- 104 -
Get IPv6 prefix delegation - Get a temporary IPv6 address and IPv6 prefix from the ISP, the
temporary IPv6 address is set to the WAN port, and the LAN port advertise IPv6 address by
RADVD or DHCPs.
IPv6 Address - The IPv6 address assigned by your ISP dynamically.
Click the Renew button to renew the IPv6 parameters from your ISP.
Click the Release button to release the IPv6 parameters from your ISP.
If your ISP gives you one or two DNS IPv6 addresses, select Use the following IPv6 DNS
Servers and enter the Primary IPv6 DNS and Secondary IPv6 DNS into the correct fields.
Otherwise, the DNS servers will be assigned from ISP dynamically.
Primary IPv6 DNS - Enter the DNS IPv6 address in dotted-decimal notation provided by your ISP.
Secondary IPv6 DNS - Enter another DNS IPv6 address in dotted-decimal notation provided
by your ISP.
Note:
If you get Address not found error when you access a Web site, it is likely that your DNS servers
are set up improperly. You should contact your ISP to get DNS server addresses.
IPv6 Address Assign Type - There are two types of assignation for IPv6 address: SLAAC
(Stateless address auto-configuration) and DHCPv6 (Dynamic Host Configuration Protocol
for IPv6) Server.
SLAAC
IPv6 Address Prefix -The Prefix of IPv6 Address.
DHCPv6 Server
IPv6 Address Prefix -The Prefix of IPv6 Address.
Release Time - the length of time a network user will be allowed to keep connecting to the
router with the current DHCPv6 Address. Enter the amount of time (in seconds) that the
DHCPv6 address will be leased. The time range is 1~691200 seconds. The default value
is 86400 seconds.
LAN IPv6 Address - Displays the LAN IPv6 Address.