Filter
Top Products
Archer C1900 AC1900 High Power Wireless Dual Band Gigabit Router
- 69 -
Note:
It is possible that you have a computer or server that has more than one type of available service.
If so, select another service, and type the same IP address for that computer or server.
To modify or delete an existing entry:
1. Find the desired entry in the table.
2. Click Modify or Delete as desired on the Modify column.
Click the Enable/ Disable All button to make all entries enabled/ disabled.
Click the Delete All button to delete all entries.
Click the Next button to go to the next page and click the Previous button to return to the
previous page.
Note:
If you set the service port of the virtual server as 80, you must set the Web management port on
Advanced→Security→Remote Management page to be any other value except 80 such as
8080. Otherwise there will be a conflict to disable the virtual server.
5.10.2 Port Triggering
Choose menu “Advanced→Forwarding→Port Triggering”, you can view and add port triggering
in the next screen shown in Figure 5-53. Some applications requir
e multiple connections, like
Internet games, video conferencing, Internet telephoning and so on. Port Triggering is used for
some of these applications that cannot work with a pure NAT router.
Figure 5-53 Port Triggering
To add a new rule, follow the steps below.
1. Click the Add New… button, the next screen will pop-up as shown in Figure 5-54.
2.
Select a common application from the Common Applications drop-down list, then the
Trigger Port field and the Incoming Ports field will be automatically filled. If the Common
Applications do not have the application you need, enter the Trigger Port and the
Incoming Ports manually.