TP-Link TL-SG2452 Switch User Manual


 
Example
Configure port 1 to be a trusted port:
TL-SG2424(config)#interface gigabitEthernet 1/0/1
TL-SG2424(config-if)#ip dhcp filtering trust
show ip dhcp filtering
Description
The show ip dhcp filtering command is used to display the running status of
DHCP Filtering.
Syntax
show ip dhcp filtering
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the running status of DHCP Filtering:
TL-SG2424#show ip dhcp filtering
show ip dhcp filtering interface
Description
The show ip dhcp filtering interface command is used to display the DHCP
Filtering configuration information of a desired port or of all ports.
Syntax
show ip dhcp filtering interface [ gigabitEthernet port ]
Parameters
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the DHCP Filtering configuration information of all Ethernet ports:
TL-SG2424#show ip dhcp filtering interface
Display the DHCP Filtering configuration information of port 5:
TL-SG2424#show ip dhcp filtering interface gigabitEthernet 1/0/5
129