TP-Link TL-SL3226P Switch User Manual


 
Table.
Static MAC Address
Filter MAC Address
Force UNAUTH MAC Address
Authorized MAC Address
2) No matter which port the MAC Address of the Force UNAUTH MAC
Table relates to, the Switch won't transfer its' packets. The following
MAC address can't be set into the Force UNAUTH MAC Table:
Static MAC Address
Filter MAC Address
Force UNAUTH MAC Address
Authorized MAC Address
4.4.6 VLAN Management
Remarks:
1) When the VLAN mode has been changed, the Switch will reboot
automatically.
!
!
!
!
!
!
!
!
2) When you configure the MTU VLAN and effect it, all original VLAN and
Trunk configuration will be cancelled.
4.4.7 Configure Trunk
Remarks:
1) Trunk Configuration Regulation:
The Switch supports 7 Trunk. 24 normal ports can only form Trunk with
the normal ports. Two modules with same model can form a Trunk. But
the module slot can't form Trunk with the normal ports. There must be
from 2 to 4 ports to be a Trunk.
The Trunk will be treated as a logistic port after you set a Trunk.
!
!
TL-SL3226P
24+2G Gigabit Managed Switch User's Guide
TL-SL3226P
24+2G Gigabit Managed Switch User's Guide
Figure 4-8 VLAN Management
Figure 4-9 Configure Trunk (Page 1 of 2)
Figure 4-10 Configure Trunk (Page 2 of 2)