Filter
Top Products
TL-SL3428/TL-SL3452 JetStream L2 Managed Switch CLI Guide
190
no snmp-server user name
Parameter
name —— User Name, ranging from 1 to 16 characters.
local | remote —— User Type, with local and remote options. Local indicates
that the user is connected to a local SNMP engine, while remote indicates that
the user is connected to a remote SNMP engine.
group-name —— The Group Name of the User. The User is classified to the
corresponding Group according to its Group Name, Security Model and Security
Level.
smode —— The Security Model of the User, with v1, v2c and v3 options. By
default, the option is v1. The Security Model of the User must be the same with
that of the Group which the User belongs to.
slev —— The Security Level of SNMP v3 Group. There are three options,
including noAuthNoPriv (no authorization and no encryption), authNoPriv
(authorization and no encryption) and authPriv (authorization and encryption).
By default, the option is noAuthNoPriv. The Security Level of the User must be
the same with that of the Group which the User belongs to.
cmode —— The Authentication Mode of the SNMP v3 User, with “none”,
“MD5” and “SHA” options. “None” indicates no authentication method is used,
“MD5” indicates the port authentication is performed via HMAC-MD5 algorithm
and “SHA” indicates the port authentication is performed via SHA (Secure Hash
Algorithm). SHA authentication mode has a higher security than MD5 mode. By
default, the Authentication Mode is “none”.
confirm-pwd —— Authentication Password, ranging from 1 to 16 characters.
emode —— The Privacy Mode of the SNMP v3 User, with “none” and “DES”
options. “None” indicates no privacy method is used, and “DES” indicates DES
encryption method is used. By default, the Privacy Mode is none.
encrypt-pwd —— Privacy Password, ranging from 1 to 16 characters.
Command Mode
Global Configuration Mode