TL-WPS510U Pocket-Sized Wireless N Print Server
Figure 3-28
12. Click “Setup” and then choose “TCP/IP”. Check “Use the following TCP/IP Settings” radio
button and then fill in the following parameters.
IP Address: Specify an IP address for your print server. The IP address must be within
the same subnet as your wireless router or access point. For example, if the LAN IP
address of your wireless router or access point is 192.168.1.1, the IP address should be
set to 192.168.1.X (1<X<255). 192.168.1.10 is suggested.
Subnet Mask: Enter the subnet mask of your network.
Default Router: Enter the LAN IP address of your wireless router or access point. Here
takes 192.168.1.1 for example.
21