TL-WPS510U Pocket-Sized Wireless N Print Server
6. Change the MAC computer’s IP Address, Subnet Mask to 192.168.1.101 and 255.255.255.0;
enter your router’s IP address in the Router blank (e.g. 192.168.1.1). Click “OK” and the MAC
computer will be automatically connected to the network WLAN-PS again.
Figure 3-43
7. Log into the TL-WPS510U and go to “Setup -> Wireless”. Configure the wireless parameters
according to your wireless router. After the configuration, click Save & Restart.
¾ Network Type/ SSID /Channel: select the network (Take TP-LINK_A4161E for example)
from the “Site Survey” list and then these three fields will be automatically filled.
¾ Transmission Rate: Keep the default value.
¾ Wireless Mode: Keep the default value.
¾ Security Type: Select the security type of your wireless router (TP-LINK_A4161E) and
then enter the key. Here we take WPA-PAK security type with 1234567890 as the key for
example.
In this example as shown in Figure 3-44, the router’s SSID is TP-LINK_61BB7A, its security
type is WPA-PSK, and its password is 0123456789. You can also select a wireless network
from the network list as shown in Figure 3-45, and then the SSID will be automatically filled in
the corresponding field.
gure 3-44, the router’s SSID is TP-LINK_61BB7A, its security
type is WPA-PSK, and its password is 0123456789. You can also select a wireless network
from the network list as shown in Figure 3-45, and then the SSID will be automatically filled in
the corresponding field.
31
