Filter
Top Products
101
certain period (for details, see the IEEE 802.3af specification).
Capacitive Detection: If the port and capacitive detection are enabled, the
capacitances state reads in the voltage result from the constant current. This is the
subtracted from the pre-capacitance voltage to get a charge rate. If this charge rate
is within the window of the PD signatures, the device is considered to be discovered.
And then, click
Apply
to carry into effect.
Port: The index of PoE ports.
Enable State: Check it to enable the PoE function to the port.
Power Limit From: Check it to decide the power limit method.
Classification
: When this check box is marked, the system will limit the power
supply to the powered device in accordance with the related class.
Legacy:
Check it to support the legacy power devices.
Priority:
Pull down the selection menu item to choose the priority of power
supplying.
Port Limit (<15400) mW:
User can key in the power limit value which is under 15.4
Watts.
Mode:
Displays the operating mode of the port.
Current (mA):
Displays the operating current of the port.
Voltage (V):
Displays the operating voltage of the port.
Power (mW):
Displays the power consumption of the port.
Determined Class:
Displays the PD’s class.
And then, click
Apply
to carry into effect.
Factory Default
Reset switch to default configuration. Click
Reset
to reset all configurations to the
default value.