Filter
Top Products
33
a port priority that
is used when two
switches tie for
position as the root
switch.
stp-admin-p2p
[Auto|True|False]
I Admin P2P of STP
priority on this
interface.
switch(config)#interface
fastEthernet 2
switch(config-if)#stp-admin-p2p
Auto
stp-admin-edge
[True|False]
I Admin Edge of STP
priority on this
interface.
switch(config)#interface
fastEthernet 2
switch(config-if)#stp-admin-edge
True
stp-admin-non-stp
[True|False]
I
Admin NonSTP of STP
priority on this
interface.
switch(config)#interface
fastEthernet 2
switch(config-if)#stp-admin-non-s
tp False
show spanning-tree
E Displays
a summary of
the spanning-tree
states.
switch>show spanning-tree
no spanning-tree G Disable spanning-tree.
switch(config)#no spanning-tree
QOS Commands Set
Commands Level
Description Example
qos policy
[weighted-fair|strict]
G Select QOS policy
scheduling
switch(config)#qos policy
weighted-fair
qos prioritytype
[port-based|cos-only|tos
-only|cos-first|tos-first]
G
Setting of QOS priority
type
switch(config)#qos prioritytype
qos priority portbased
[Port]
[lowest|low|middle|high]
G Configure Port-based
Priority
switch(config)#qos priority
portbased 1 low