Transition Networks CPSMC0810-100 Switch User Manual


 
21
CPSMC08xx-100 PointSystem
Chassis
chassis
24 hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600
4.3 Connecting the Slide-in-Modules to the Network
Once the CPSMC08xx-100 chassis has been installed, the media converter slide-in-
modules may be connected to the network.
CAUTION: Connect input/output network cables ONLY to media converter slide-
in-module connectors within the same network protocol (such as Ethernet-to-
Ethernet, Fast Ethernet-to-Fast Ethernet, ATM-to-ATM). Failure to observe this
caution will cause data transfer to fail.
Refer to the user’s guides included with the media converter slide-in-modules for
cabling specifications and instructions.
4.4 Operation
Daily operation of the CPSMC08xx-100 chassis requires no network administrator
activity except for the occasional monitoring of the status LED indicators on the
installed media converter slide-in-modules.
Each media converter slide-in-module and each management module has one or
more LED indicators to help monitor the network.
Refer to the user’s guide included with each management module and slide-in-
module to interpret the LED indicators on the modules.
10BASE-T
INPORT
MCCM10
MGMT MASTER
OUTPORT
12C
12C-1TERM
INIT
RX
TX
LNK
PWR
RESET
DB-9
CFETF110
SPD
PWR
FRX
CRX
FLNK
CLNK
10/100TX
RX
TX
10/100SX
LKS
PWR
LKM
Multimode
Singlemode
TX
RX
TX
RX
CFETF110
SPD
PWR
FRX
CRX
FLNK
CLNK
10/100TX
RX
TX
10/100SX
LKS
PWR
LKM
Multimode
Singlemode
TX
RX
TX
RX
CPSMC-0800
8-Slot Chassis
Mpls, MN 55344
Mpls, MN 55344
Input Power:
Input Power:
110-240 VAC
110-240 VAC
1.6A max. (60W max)
1.6A max. (60W max)
50/60 Hz
50/60 Hz
LED indicators on the management module and slide-in-modules
RX
TX
LNK
PWR
RESET
DB-9
CFETF110
SPD
PWR
FRX
CRX
FLNK
CLNK
10/100TX
RX
TX
10/100SX
LKS
PWR
LKM
Multimode
Singlemode
TX
RX
TX
RX
CFETF110
SPD
PWR
FRX
CRX
FLNK
CLNK
10/100TX
RX
TX
10/100SX
LKS
PWR
LKM
Multimode
Singlemode
TX
RX
TX
RX
CPSMC-0800
8-Slot Chassis
Mpls, MN 55344
Mpls, MN 55344
Input Power:
Input Power:
110-240 VAC
110-240 VAC
1.6A max. (60W max)
1.6A max. (60W max)
50/60 Hz
50/60 Hz
Check the individual user's guides for specific information on
how to connect each slide-in-module to the network.