Filter
Top Products
34
CONFIGURING 802.1X – EAP-TLS
1. At Security Mode select WPA from the drop-down menu.
2. At Authentication Protocol select TLS from the drop-down menu.
3. TLS requires both server and user certification. Click Configure Certificate (see Note
below). The following window appears:
Use user certificate
Check this box if your network requires user certification and
then select the certificate from the drop-down menu.
Validate server certificate
Check this box if your network requires server certification and
then select the certificate authority from the drop-down menu.
Server name:
Type in the name of the server that is used for 802.1X
authentication.
Server name should match
exactly
Check this box if the server name should exactly match the name
in the certificate.
4. Click OK to apply the settings.