Filter
Top Products
New: Click “New” to erase all fields and enter new information.
Priority Up: Select a rule from the list and click “Priority Up” to increase the
priority of the rule.
Priority Down: Select a rule from the list and click “Priority Down” to decrease
the priority of the rule.
Update Priority: After increasing or decreasing the priority of a rule, click
“Update Priority” to save the changes.
Management
Management enables users to set up SNMP and Remote Management feature.
SNMP
This screen enables you to configure the SNMP.
Enabled/Disabled: Click to enable or disable SNMP.
System Name: A name given to the WLAN Router.
System Location: Description the location of the WLAN Router (normally, the
DNS name).
System Contact: Description the contact information for the person responsible for
the WLAN Router.
Community: SNMP system name for exchanging SNMP community messages.
The name can be used to limit SNMP messages passing through the network. The
default name is 'public.'
Trap Receiver: Type the name of the destination PC that will receive trap
messages.