Filter
Top Products
Model: SU20K3/3X
Includes: • Power Module • Battery Module
Model: SU20K3/3INTPM Model: BP240V33
Input
Input Voltage: 220/380, 230/400, 240/415V AC, 3ø, 4 wire
(plus ground), wye
Input Frequency 50/60 Hz ± 3 Hz (auto-selectable)
Voltage Correction Range: 156-280/270-485V AC
Input Current
(Per Phase, On-Line) 30A/29A/28A
Inrush Current <300A
Power Factor (Full Load) >0.95
Efficiency (Full Load/On-Line) >90%
Circuit Breaker 50A (3p)
Input Bypass Circuit Breaker 50A (3p)
Output
VA 20000
Watts (Power Factor: 0.8) 16000
Waveform (On-Line) Sinewave
Waveform (On-Battery) Sinewave
Output Voltage (RMS): User-selectable 220/380, 230/400,
240/415V AC, 3ø, 4 wire (plus ground), wye
Output Frequency 50/60 Hz (auto-selectable)
(± 0.1 Hz on battery)
Voltage Regulation ±2%
Max. Harmonic Distortion <3%
(Non-Linear Full Load)
Overload Capabilities
<
102% (continuous), 102%~125% (1 min.),
125%~150% (30 sec.),
>
150% (2 sec.)
Short Circuit Capability
>
110A
Crest Factor 3:1
Battery
Battery Type Sealed, Lead-Acid, 12V/33 AH
Battery Quantity 20
Protection 2x 125A/400V fuse
Typical Backup Time (Half Load) 30+ min.
Typical Backup Time (Full Load) 12+ min.
Operation
On-Line Transfer Time 0 ms
(Line to Battery, Battery to Line)
Audible Noise <65 dBA
(Full Load @ 1 meter)
Indicators
Includes an LCD Display and LEDs (AC Line In, Bypass Line In, AC to DC,
DC to AC, AC Output, Battery Back-Up, Bypass).
Communications
Includes an RS-232 DB9 female connector, an AS-400 DB9 female
connector, a dry contact DB9 female connector and an accessory slot.
Connections
Input Terminal Block 100A
Output Terminal Block 100A
External Battery Terminal Block 100A
Physical Specifications
Power Module Dimensions (H x W x D): 87 x 38 x 66 cm (34 x 15 x 26 in)
Power Module Shipping Weight: 149 kg (330 lb)
Battery Module Dimensions (H x W x D): 51 x 45 x 91 cm (20 x 18 x 36 in)
Battery Module Shipping Weight: 278 kg (611 lb)
The specifications listed below are for Tripp Lite model SU20K3/3X and SU30K3/3X which each include two modules: a power module
and a battery module. The two modules are also sold separately with their own individual model numbers.
Specifications
+ Backup times are expandable with additional Battery Modules sold separately. The policy of Tripp Lite is one of continuous improvement. Specifications are subject to change without notice.This product designed and
engineered in the USA.
Regulatory Compliance Identification Numbers
For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series number.The series number can be found on the product nameplate label, along with all required
approval markings and information. When requesting compliance information for this product, always refer to the series number.The series number should not be confused with the marking name or model number of the product.
Model: SU30K3/3X
Includes: • Power Module • Battery Module
Model: SU30K3/3INTPM Model: BP240V33
Input
Input Voltage: 220/380, 230/400, 240/415V AC, 3ø, 4 wire
(plus ground), wye
Input Frequency 50/60 Hz ± 3 Hz (auto-selectable)
Voltage Correction Range: 156-280/270-485V AC
Input Current
(Per Phase, On-Line) 45A/43A/41A
Inrush Current <300A
Power Factor (Full Load) >0.95
Efficiency (Full Load/On-Line) >90%
Circuit Breaker 63A (3p)
Input Bypass Circuit Breaker 63A (3p)
Output
VA 30000
Watts (Power Factor: 0.8) 24000
Waveform (On-Line) Sinewave
Waveform (On-Battery) Sinewave
Output Voltage (RMS): User-selectable 220/380, 230/400,
240/415V AC, 3ø, 4 wire (plus ground), wye
Output Frequency 50/60 Hz (auto-selectable)
(± 0.1 Hz on battery)
Voltage Regulation ±2%
Max. Harmonic Distortion <3%
(Non-Linear Full Load)
Overload Capabilities
<
102% (continuous), 102%~125% (1 min.),
125%~150% (30 sec.),
>
150% (2 sec.)
Short Circuit Capability
>
150A
Crest Factor 3:1
Battery
Battery Type Sealed, Lead-Acid, 12V/33 AH
Battery Quantity 20
Protection 2x 125A/400V fuse
Typical Backup Time (Half Load) 18+ min.
Typical Backup Time (Full Load) 6+ min.
Operation
On-Line Transfer Time 0 ms
(Line to Battery, Battery to Line)
Audible Noise <65 dBA
(Full Load @ 1 meter)
Indicators
Includes an LCD Display and LEDs (AC Line In, Bypass Line In, AC to DC,
DC to AC, AC Output, Battery Back-Up, Bypass).
Communications
Includes an RS-232 DB9 female connector, an AS-400 DB9 female
connector, a dry contact DB9 female connector and an accessory slot.
Connections
Input Terminal Block 100A
Output Terminal Block 100A
External Battery Terminal Block 100A
Physical Specifications
Power Module Dimensions (H x W x D): 87 x 38 x 66 cm (34 x 15 x 26 in)
Power Module Shipping Weight: 149 kg (330 lb)
Battery Module Dimensions (H x W x D): 51 x 45 x 91 cm (20 x 18 x 36 in)
Battery Module Shipping Weight: 278 kg (611 lb)
13