Filter
Top Products
7
1. Plug in the KVM. Use only the power cord supplied with the unit.
2. Switch ON the computers.
To reset the KVM switch, press both Select buttons on the front panel simultaneously. The
Server Interface Units are unaffected by this reset.
Ambient Operating Temperature
The ambient operating temperature in the rack may be an issue and is dependent upon the
rack load and ventilation. When installing in a closed or multi-unit rack assembly, make sure
that the temperature will not exceed the maximum rated ambient temperature.
Airflow
Ensure that the airflow within the rack is not compromised.
Circuit Overloading
When connecting the equipment to the supply circuit, consider the effect that overloading of
circuits might have on over-current protection and supply wiring.
Reliable grounding of rack-mounted equipment should be maintained.
Use the L-shaped brackets and screws provided to mount the KVM in a server rack as
illustrated below.
Installation
(continued)
Connecting the Power Supply
Resetting the KVM Switch
Rackmount Considerations
Rackmounting the NetCommander KVM
Figure 7 Connecting the L-shaped bracket
200512060 93-2520 B072 series OM.qxd 3/6/2006 11:17 AM Page 7