Filter
Top Products
For (2):
n indicates the number of bar code data, and the printer processes
n bytes from the next character data as bar code data.
If n is outside of the specified range, the printer stops command
processing and processes the following data as normal data.
In standard mode:
If d is outside of the specified range, the printer only feeds paper
and processes the following data as normal data.
If the horizontal size exceeds printing area, the printer only feeds
the paper.
This command feeds as much paper as is required to print the bar
code, regardless of the line spacing specified by ESC 2 or ESC 3.
This command is enabled only when no data exists in the print
buffer. When data exists in the print buffer, the printer processes
the data following m as normal data.
After printing bar code, this command sets the print position to the
beginning of the line.
In page mode :
This command develops bar code data in the print buffer, but does
not print it. After processing bar code data, this command moves
the print position to the right side dot of the bar code.
If d is out of the specified range, the printer stops command
processing and processes the following data as normal data. In
this case the data buffer position does not change.
If bar code width exceeds the printing area, the printer does not
print the bar code but moves the data buffer position to the left side
out of the printing area.
27
28
RP-3180 USER'S MANUAL
RP-3180 USER'S MANUAL
FS p n m
FS q n [xL xH yL yH d1...dk]1...[xL xH yL yH d1...dk]n
[Name]
[Format]
[Range]
[Description]
[Name]
[Format]
[Range]
[Description]
[Example]
Print NV bit image
ASC II FS p n m
Hex 1C 70 n m
Decimal 28 112 n m
1 n 4
0 m 3, 48 m 51,
Prints a NV bit image n using the mode specified by m.
N is the number of the NV bit image .
M specifies the bit image mode.
Define NV bit image
ASC II FS q n [xL xH yL yD d1...dk]1
Hex 1C 71 n [xL xH yL yD d1...dk]1
Decimal 28 113 n [xL xH yL yD d1...dk]1
1 n 4
0 xL 72
xH=0
0 yL 255
0 yL 1(when 1 (yL+yH x 256) 288)
0 d 255
k=(xL + xH x 256) x (yL+yH x 256) x8
Total defined data area = 2M bits (256K bytes)
Define the NV bit image specified by n..
N specifies the number of the defined NV bit image .
XL, xH specifies (xL+xH x 256) x8 dots in the horizontal direction
for the NV bit image you are defining.
YL, yH specifices (yL+yH x 256) x 8 dots in the vertical direction
for the NV bit image you are defining.
When xL = 64, xH = 0, yL = 96, yH = 0
0,48
1,49
2,50
3,51
Normal
Double-width
Double-heigh
Quadruple
Vertical
Dot Density
203 DPI
203 DPI
101 DPI
101 DPI
Horizontal
Dot Density
203 DPI
101 DPI
203 DPI
101 DPI
Mode
m