Filter
Top Products
2.4 Rack mounting
Chapter 2: Setting up 35
on the front of the unit) are fixed to the front
end of the rail.
3. Fully extend the sliding rails until they lock.
Note: Do not tighten the brackets to the
rails as you will need to adjust their position
later.
4. Screw each sliding rail to the side of the Transport GX21
as shown. You will need 3 short, silver colored screws
from the supplied nuts, screws and washers kit, for each
rail.
5. Return the sliding rails to their shortest position.
Note: When fully extended, the sliding rails
will lock. The release mechanism is located
on the sliding rail as shown. Press the