Filter
Top Products
52
http://www.TYAN.com
Key Function
Enter
Pops up an option window for the highlighted field.
Esc 1) Returns to the main menu from a sub-menu.
2) Exits Setup.
F9
Restores the Setup defaults.
F10
Saves changes and exits Setup.
Main Menu
The Main menu contains the basic configuration settings of your system.
System Time sets the system time (Hour, Minute, Second).
System Date sets the system date (Day, Month, Year).
Channel 0 / Channel 1 Master/Slave, Channel 2, Channel 3 Each of these six items
sets the type of hard disk drive in your system.
NOTE: Your computer cabinet can accommodate up to two IDE or SATA devices only
although the BIOS supports up to four devices.
Boot Features
Summary Screen enables or disables the displaying onscreen of various system
information while booting.
QuickBoot Mode sets if the system will skip certain tests while booting. This will
decrease the time needed to boot the system.
Memory Frequency Shows the current frequency of system memory.
Memory Channel Shows the current channel mode of system memory.
System Memory Shows the total memory on your system.
Extended Memory Shows the total extended memory on your system.
Advanced Menu
The Advanced menu contains the input/output configuration settings of the system.
Installed O/S sets the operating system to be installed.
Reset Configuration Data Normally, you would leave this field disabled. Select Yes to
reset the Extended System Configuration Data (ESCD) when you exit Setup if you have
installed a new add-on device and the system reconfiguration has caused such a serious
conflict of resources that the operating system cannot boot.
Large Disk Access Mode Select DOS or Other.