Filter
Top Products
9
http://www.TYAN.com
1.2 Specifications
NOTE: Specifications are subject to change without notice.
Processor
• Single socket 478
• Intel
Pentium 4 Northwood/Prescott
processor
• Supports 533/800 MHz FSB
Chipset
• Intel 875P MCH
• MCH+ICH-5R
• SMC LPC47M172 Super I/O chip
Memory
• Two 64-bits wide DDR data channels
• Single/dual-channel mode support
• Four 184-pin DDR DIMM slots
• DDR 266/333/400 MHz support
• Up to 4 GB of unbuffered DDR
• Supports non-ECC/ECC-type memory
modules
Expansion Slot
• One 32-bit/33MHz PCI v2.3 slot on riser
card
Integrated PCI Graphics
• ATI Rage
TM
XL PCI graphics controller
• 8 MB frame buffer of video memory
External I/O Ports (Rear)
• One 9-pin UART serial port
• One VGA port
• Two RJ-45 LAN connectors
• Two USB 2.0 ports
Front Panel Features
• LED Indicators
– Power
– LAN 1 and LAN 2 Link/Activity
– HDD
• LCD interface
– 2 x 16 digits
– Connected via COM2
– Four direction buttons plus one “Select”
and one “Cancel” button
• Two USB 2.0 ports
Networking
• Two 1000Base-T, 100Base-TX, and
10Base-T Ethernet LAN ports (Intel
82541GI and 82547GI controllers)
• Supports TCP, UDP, IPv4 Checksum
off-load
Storage Capacity
• Up to two PATA HDDs or two SATA HDDs
• SATA HDDs support RAID0, RAID1 (for
Windows 2000/XP)
Integrated Hardware Monitoring
• ADT7463
• CPU temperature and voltage monitoring
• Smart fans control
• CPU and system fan speed monitoring
• 3 x 3-pin header for system fans
BIOS
• Phoenix BIOS on 4 MB Flash (FWH)
• ACPI 2.0 / APM 1.2
• Detect function of hardware monitoring
• Auto configuration of IDE hard disk types
• Quick boot and multiple boot options
• LAN remote boot (PXE) support
• Power Management: S1 and S5-type
Environment
• Operating temperature:
5 (41 ) to 35 (95 )
• Operating humidity:
0 % to 80 % non-condensing
Cabinet Form Factor
• Sub-1U rack-mountable chassis
• Dimension:
W16.7 x D15.3 x H1.7 inch
W424 x D387.7 x H43.5 mm
• Weight: 7 kg
Power Supply
• ATX12V 300W with PFC
Regulatory
• FCC Class B
• CE (Declaration of Conformity)