Filter
Top Products
Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model)
4-6
http://www.tyan.com
4.7.3 Using the Intel RAID Option ROM
Creating, Deleting, and Resetting RAID Volumes
The Serial ATA RAID volume may be configured using the RAID Configuration utility stored
within the Intel RAID Option ROM.
During the Power-On Self Test (POST), the following message will appear for a few seconds:
Note
The ‘Drive Model’, ‘Serial #’, and ‘Size’ listed in your system can differ
from the following example.
Intel (R) RAID for Serial ATA - RAID BIOS v3.6.0.6277
Copyright (C) 2003-04 Intel Corporation. All Rights Reserved.
RAID Volumes:
None defined.
Non - RAID Disks:
Port Drive Model Serial #
0 WDC WD2500JD-00F WD-WMAEH2201346
1 WDC WD2500JD-00F WD-WMAEH2201823
Press <CTRL-I> to enter Configuration Utility..
Size Status Bootable
232.8GB
232.8GB
Normal Yes
Normal Yes
After the above message appears, press the <Ctrl> and <i> keys simultaneously to enter the
RAID Configuration Utility.
4.7.4 Create RAID 0 or RAID 1 Volume
Note
The following procedure should only be used with a newly-built system or
if you are reinstalling your operating system. The following procedure
should not be used to migrate an existing system to RAID 0.
After pressing the <Ctrl> and <i> keys simultaneously, the following window will appear:
RAID Volumes:
None defined.
Non-RAID Disks:
Port Drive Model Serial #
0 WDC WD2500JD-00F WD-WMAEH2201346
1 WDC WD2500JD-00F WD-WMAEH2201823
Intel (R)
Copyright (C) 2003-04 Intel Corporation. All Rights Reserved.
RAID for Serial ATA - RAID Configuration Utility
v3.6.0.6277
[ ]-Select [ESC]-Exit [ENTER]-Select Menu
D
I
S
K
/
V
O
L
U
M
E
I
N
F
O
R
M
A
T
I
O
N
[
]
M
A
I
N
M
E
N
U
[
]
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
4. Exit
Size Status Bootable
232.8GB
232.8GB
Normal Yes
Normal Yes