Filter
Top Products
Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model)
4-26
http://www.tyan.com
4.16.2 Create Volume Manually
The Intel Application Accelerator RAID Edition offers the ability to create a RAID volume. This
option should be used if you are using a third bootable device such as an IDE or SCSI hard
drive – in addition to using two Serial ATA hard drives. One benefit of using a third bootable
device and creating a RAID volume is that the operating system is not located on the RAID
volume. Should something happen to the RAID volume, the operating system should not be
impacted.
Note
The ‘Create RAID Volume’ option is not selectable unless a third
bootable device (such as an IDE or SCSI hard drive) is installed in the
system – in addition to using two Serial ATA hard drives.
To manually create a RAID volume, right-mouse click on ‘Actions’ and select ‘Create RAID
Volume’ to create a new RAID volume as illustrated below:
Note
Manually creating a RAID volume can also be accomplished by clicking
on the ‘Actions’ file menu, and then arrow down and click on 'Create
RAID Volume'.
Select the RAID Volume Name, RAID Level, and Strip Size
Select the RAID volume name, RAID level, and strip size and then click ‘Next’: