Filter
Top Products
http://www.tyan.com
36
3.2 Advanced Setup
Options such as I/O device interfaces can be altered through this screen.
Yes Erases all configuration
data in a section of mem-
ory for ESCD (Extended
System Configuration
Data) which stores the
configuration settings for
non-PnP plug-in devices.
FORMAT: [option]
NOTES: Select Yes when required to restore the manu-
facturer’s defaults.
OPTIONS:
Reset Configuration Data
No Does not erase ESCD.
Disabled / Enabled Enables or disables the
USB onboard controller.
FORMAT: [option]
OPTIONS:
USB Host Controller
Disabled Enables or disables sup-
port for Legacy USB.
FORMAT: [option]
OPTIONS:
USB BIOS Legacy Support
Chipset Configuration Discussed on p. 38
Keyboard Configuration Discussed on p. 39
I/O Device Configuration Discussed on p. 39
Both ‘Both’ enables both IDE
ports.
FORMAT: [option]
OPTIONS:
Onboard PCI IDE
Disabled Disables the ports.
Primary Enables the primary port
only.
Secondary Enables the secondary
port only.
Disabled ‘Disabled’ turns off the
port.
FORMAT: [option]
OPTIONS:
Serial Port A (..B)
Enabled ‘Enabled’ requires you to
enter the base I/O
address and the INT num-
ber on the next line.
Auto ‘Auto’ makes the BIOS
configure the port during
POST.