Filter
Top Products
12
http://www.TYAN.com
2.5– CMOS Reset (JP13)
Pin_3 Pin_1
Default
Pin_3 Pin_1
Clear
You can reset the CMOS settings by
using this jumper if you have forgotten
your system/setup password or need to
clear system BIOS setting.
- Power off system and disconnect
both power connectors from the
motherboard
- Use jumper cap to close Pin_2 and
Pin_3 for several seconds to Clear
CMOS
- Put jumper cap back to Pin_1 and
Pin_2 (default setting)
Reconnect power & power on system
2.6 – S/PDIF Header (J1)
Pin-1 Pin-2 Pin-3 Pin-4
SPDIF
_OUT
NC KEY GND