Filter
Top Products
Tiger i7320 S5350 Chapter 3: BIOS Setup
3-11
http://www.tyan.com
Force Compliance Mode Entry:
Enable or Disable PCI-E Compliance mode by setting item to the desired value.
Enabled / Disabled
DRAM Data Integrity Mode
If you have ECC memory modules installed, select the correct ECC mode with this setting.
Disabled / 72-bit ECC / 144-bit ECC / Auto
ECC Error Type
When an ECC error occurs, it generates an interrupt. Select the type of interrupt to report:
NMI (Non-Maskable); SMI (System Management); SCI (System Control).
None / NMI / SMI / SCI
SERR signal condition
Select ECC error conditions that SERR# be asserted.
None / Single bit / Multiple bit/ Both
Memory Remap Function
Remaps the memory used by the BIOS (A0000 to FFFF - 384 k) above the 1 Mb limit. If
enabled, you cannot shadow Video and System BIOS.
Enabled / Disabled
3.4.2.1 Integrated Device Control Sub-Menu
USB Device 29, Function 1:
Enable or Disable this USB Device by setting item to the desired value.
Enabled / Disabled
USB Device 29, Function 0 & 1:
Enable or Disable these 2 USB Functions by setting item to the desired value.
Enabled / Disabled
USB Device 29, Function 7:
Control USB 2.0 functionality through this Setup Item.
Enabled / Disabled