Filter
Top Products
Tiger i7320 S5350 Chapter 4: SATA/RAID Setup (for SATA RAID model)
4-17
http://www.tyan.com
• Then look for a parameter in the Parameters list box titled ‘Driver Version’. This should
have a version number in the following format:
3.6.0.xxxx
4.10.2 RAID Driver File Properties:
• Locate the file “iaStor.sys” within the following path:
<System Root>\Windows\System32\Drivers
• Right click on “iaStor.sys” and select ‘Properties’
• Select the ‘Version’ tab
• Located at the top of this tab’s view should be a parameter call “File version”. Next to it is
the RAID Driver version. It should have a version number in the following format:
3.6.0.xxxx
4.11 Issues During Installation
4.11.1 Symptom: Incompatible Hardware
The following error message occurs during installation:
Resolution: This issue is resolved by installing the Intel Application Accelerator RAID Edition on
a system with a supported Intel chipset.
4.11.2 Symptom: Unable to launch Intel(R ) Application Accelerator Readme file.
The following error message occurs during installation:
Resolution: This issue is resolved by installing the Intel Application Accelerator RAID Edition on
a system with a supported Intel chipset.
Note
Note For Windows* XP and Windows 2000 Users: In order to
successfully complete installation of the Intel Application Accelerator
RAID Edition with Windows* XP or Windows 2000, the user must be
logged on with Administrator rights.
4.12 “RAID Ready”
4.12.1 “RAID Ready” Definition
A "RAID Ready" system is a specific system configuration that enables a seamless migration
from a single non-RAID disk drive to a dual disk drive RAID 0 or RAID 1 array.