Filter
Top Products
15
The Dimming Function allows a device, usually lighting, to be adjusted brighter or dimmer. If the Dimming
Function is enabled for the selected item, the system will also announce
Individual Item Control Menu Function
“Press [3] to increase”“Press [3] to increase”
“Press [3] to increase”“Press [3] to increase”
“Press [3] to increase” Increases the brightness
“Press [4] to decrease”“Press [4] to decrease”
“Press [4] to decrease”“Press [4] to decrease”
“Press [4] to decrease” Decreases the brightness
Mode Control
The Mode Control function allows you to turn schedules ON and OFF. Your installer will inform you if Schedules
have been programmed for you system, and of how and when they will operate.
Schedules are used to turn devices on and off automatically. For example, a schedule may be programmed to
turn on a set of lights at the same time every night, and then to shut the lights off in the morning. If you want to
temporarily shut the schedule off (for example, so you can manually control the lights) use the Mode Control
Menu to turn the schedule off or on. Schedules are programmed by your installer. To have schedules
programmed or modified, contact your installer for assistance.
From the Home Automation Menu, press [2]. When [2] is pressed, the system will announce the Mode Control
Menu:
Mode Control Menu Function
“Mode {number} is OFF (or ON)”“Mode {number} is OFF (or ON)”
“Mode {number} is OFF (or ON)”“Mode {number} is OFF (or ON)”
“Mode {number} is OFF (or ON)” Indicates whether the current mode is ON or OFF
“To change press [1]”“To change press [1]”
“To change press [1]”“To change press [1]”
“To change press [1]” Press [1] to turn the Mode ON or OFF.
“For the next mode, press [2]”“For the next mode, press [2]”
“For the next mode, press [2]”“For the next mode, press [2]”
“For the next mode, press [2]” Press [2] to advance to the next Mode.
“For the previous mode, press [3]”“For the previous mode, press [3]”
“For the previous mode, press [3]”“For the previous mode, press [3]”
“For the previous mode, press [3]” Press [3] to skip back to the previous Mode.
“To exit press [#]”“To exit press [#]”
“To exit press [#]”“To exit press [#]”
“To exit press [#]” Press [#] to return to the Home Automation Menu.
Global Item Control
Certain devices controlled by your system may be defined by your installer as “Global Items”. These are items
that may be controlled by a single command. For example, all of the lighting on the premises may be defined
as Global Items. This would allow all of the lighting to be turned on or off by a single command. Your installer
will inform you of which automation items on your system are programmed as Global Items.
From the Home Automation Menu, press [3]. When [3] is pressed, the system will announce
“To turn global items on press [1].“To turn global items on press [1].
“To turn global items on press [1].“To turn global items on press [1].
“To turn global items on press [1].
To turn global items off press [2].To turn global items off press [2].
To turn global items off press [2].To turn global items off press [2].
To turn global items off press [2].
To exit press [#]”To exit press [#]”
To exit press [#]”To exit press [#]”
To exit press [#]”