Filter
Top Products
7
Alarm Memory
Your system will record in its memory alarms that occurred while the system was armed. If an alarm occurred
while the system was armed, the system will announce this message when the system is disarmed:
“There are {number} alarms in memory, Zones {number}”“There are {number} alarms in memory, Zones {number}”
“There are {number} alarms in memory, Zones {number}”“There are {number} alarms in memory, Zones {number}”
“There are {number} alarms in memory, Zones {number}”
To review the Zones that went into alarm, press [✱]. The system will announce
“For Alarm Memory press [3]”“For Alarm Memory press [3]”
“For Alarm Memory press [3]”“For Alarm Memory press [3]”
“For Alarm Memory press [3]”
Press [3] and the system will indicate the zones in Alarm Memory with messages similar to the following:
“There are {number} alarms in memory, Zone {number}.“There are {number} alarms in memory, Zone {number}.
“There are {number} alarms in memory, Zone {number}.“There are {number} alarms in memory, Zone {number}.
“There are {number} alarms in memory, Zone {number}.
To exit press [#]”To exit press [#]”
To exit press [#]”To exit press [#]”
To exit press [#]”
When finished reviewing the zones in alarm memory, press the [#] Key to return to the other system status
messages.