UNICOM Electric GST-2402 Switch User Manual


 
Rack-mounted Installation
The SmartGST-2402 comes with a rack-mounting kit and can be mounted in
any EIA standard size, 19" Rack. The Switch can be placed in a wiring closet
with other equipment.
Perform the following steps to rack mount the switch:
A. Position one bracket to align with the holes on one side of the switch and
secure it with the smaller bracket screws. Then attach the remaining
bracket to the other side of the Switch.
Figure 2-4. Attach mounting brackets with screws
B. After attaching mounting brackets, position the SmartGST-2402 in the
rack by lining up the holes in the brackets with the appropriate holes on
the rack. Secure the Switch to the rack with a screwdriver and the rack-
mounting screws.