UNICOM Electric GST-2402 Switch User Manual


 
Port Status
It displays the status of the ports. Enter the “1” to enter the Port Status
display interface. In the Port Status interface, using the “2” to view next page.
Using the “1” to go back to previous page.
Speed: display port connection speed.
Duplex: display port duplex mode.
Link: display port statuses link status. When the port is connecting with
the device and work normally, the link status is “UP”. Opposite is “Down”.
Flow Control: display the flow control status is “enable” or “disable”.
Auto Negotiation: display the auto negotiation status.
Trunk: display the port belongs in which trunk group if the port were
added into a trunk group.
Port status interface
Port Configuration
You can configure speed, status, flow control, Tx bandwidth, and Rx
bandwidth of each port using the control key to set up the configuration.