Filter
Top Products
Connecting the Power
Direct Connection
WARNING: The BCT-10 is designed to operate only with 12V DC,
negative ground power systems. Operation of the unit
on other voltages or polarities will cause damage to
the unit and may create a fire hazard.
The straight power cord provided with the unit has bare wires at
one end, and a small connector at the other end.
1. Connect the positive wire to a 12V DC source in your vehicle’s
fuse box.
2. Connect the other wire to ground.
MUTE
MODE
ALARM
L/0
HOLD
STATE
HIGHWAY
SYSTEM
OFF
Fuse
Box
12