Filter
Top Products
3. Run the power cord from the fuse box to the BCT-10.
Note: Ensure the cord does not interfere with vehicle operation
or cause a tripping hazard.
4. Plug the power cord connector into the Control Unit at the jack
labeled “DC 12V.”
Note: Push the connector firmly into the jack.
Using the Cigarette Lighter Adapter
1. Insert the small connector
into the jack on the side of
the unit.
2. Insert the other end into the
cigarette lighter socket of
your vehicle.
MUTE
MODE
ALARM
L/0
HOLD
STATE
HIGHWAY
SYSTEM
OFF
Connecting the Power
13