Filter
Top Products
Operating Instructions
Applying Power
1. Turn the OFF/VOLUME
control counter clockwise to
power on the scanner. Adjust
the volume about 1/4 turn.
2. During power-on, a self-test
is performed. Check the front
control panel for proper
operation.
3. All the LED’s on the front
control panel light up and the
numbers 1 through 9 count
up on the LED display. An
Alert tone is also sounded.
This tells you that the
scanner is working properly.
4. The currently selected state
appears on the display. The
BCT-10 always comes on
with the last settings
selected, and in the last
mode of operation.
MUTE
DISPLAY
SR HP
WX LP
MUTE
HOLD
9
TX
MUTE
HOLD
15