Filter
Top Products
~
--
-
, 0
InstaIlation- Con necti ngPower
The MC 800 will work with any ship's 12 volt nominal DC voltage.
(see specifications for more details) Connect the power cable fur-
nished to a DC source capable of supplying at least 1.0 amperes of
current. The power leads should normally be routed to the ship's DC
power distribution panel (on larger boats) or directly to the battery
main circuit breaker (on smaller boats).
Be sure to observe the proper polarity when connecting the power.
The red lead wire of the power cable should be connected to the
positive terminal, and the black lead should be connected to the
negative terminal.
Warning
The indicator unit is protected by an inline 1.0 ampere fuse. To
reduce the risk of fire or electric shock, replace this fuse only with
one of the proper specification.
(D
(D
~
D
(D
(D
- 11 -
f
- - - - - - - --" -- ~= =-- - -- -- -,--I ~-