Filter
Top Products
~-.....
-~===
'=
Scanning
SCAN
~
Turn on the power, or press C. SCAN)to start scanning.
(When the scanner is turned on, it is automatically in
Scan mode.)
Scanning stops on any active channel automatically,
except those channels programmed with ~ .
Scanning resumes automatically 2 seconds after the
channel becomes inactive.
Press C.MANUAL)anytime to stop scanning. When you press
~, you are out of Scan mode, and the scanner
remains on the displayed channel.
Pres~c:scAN)to start scanning again, or press ~ to
step up 1 channel.
You can press ~ repeatedly to manually scan all 16
channels, 1 press per channel, including the channels that
are locked out.
Direct Chan nel Access
This feature allows you to instantly access a specific channel you want to monitor.
Example: Select Channel 4.
G) (i) I PressG).
CDCD
om
SCAN
Press C. MANUAIJ .
When you press~, the display changes to "4", but the scanner still monitors the
previous channel displayed. You must press C. MANUAL)to successfully complete the
direct access to Channel 4.
10
1
1
1