Filter
Top Products
14
Visit our online store via our website; www.uniden.com.au for
Australia or www.uniden.co.nz for New Zealand.
INSTALLING THE UBC355XLT SCANNER
FOR HOME USE DESKTOP INSTALLATION
Insert the DC plug end of the AC Adapter into the DC 13.8V 1.
jack on the rear panel.
Plug the AC Adapter into a standard 240V AC wall outlet. 2.
Plug the Telescoping Antenna into the ANT connector. Extend 3.
the antenna to its full height. For frequencies higher than 400
MHz, shortening the antenna may improve the reception.
Use the desktop stand (fold out from bottom of unit) for a better
viewing and operating angle. Helpful Hints
If strong interference or electrical noise is received, relocate •
the scanner or its antenna away from the source.
If you are operating the scanner in a fringe area or need to •
improve reception, use an optional antenna designed for