Filter
Top Products
59
PROBLEM SOLUTION
Scan won’t start Try one of these options:
Press the bank key again. •
Adjust the Squelch Control.•
Program frequencies into the bank •
before using (for PRIVATE bank).
Check to see if all channels are locked •
out. It is possible that none of the
programmed frequencies are active at
the time. Try the band search.
Search won’t
start
Adjust the Squelch Control. •
Check the antenna connection.•
Prog key won’t
work
Stop scan or search.
You still have a
problem
Visit the customer support page on our
website; www.uniden.com.au for Australia or
www.uniden.co.nz for New Zealand.