Filter
Top Products
33
Special Features
• If the scanner is searching, press Func + Dly
while the scanner is searching. DLY appears and
the scanner automatically adds a 2-second
delay to every frequency it stops on in that band.
To turn off the 2-second delay, press Func + Dly
while the scanner is monitoring a channel, scanning,
or searching. DLY disappears.
Locking Out Channels
You can increase the scanning speed by locking out
channels that have a continuous transmission.
To lock out a channel, manually select the channel,
then press Func + L/O. L/O appears.
Note: You can still manually select locked-out
channels.
To remove the lockout from a channel, manually
select the channel, then press Func + L/O.
L/O disappears.
To unlock all channels, press Hold to stop scanning,
then press Func and press and hold L/O until the
scanner beeps twice.
Priority
The priority feature lets you scan through the
channels and still not miss important or interesting
calls on specific channel. You can program one
stored channel as a priority channel.
If the priority feature is turned on, as the scanner
scans channels, it checks priority channel for activity
every 2 seconds.
The scanner automatically designates first channel
as its priority channel.
UB334 Paper OM reduced size.fm Page 33 Friday, September 9, 2005 11:16 AM