Filter
Top Products
46 Sportster Winmodem 33600 & x2/56K - User's manual
&Z
n
=
s
Writes phone number string
s
to NVRAM at
position
n (n =
03).
&Z
n
=L Writes last executed dial string to NVRAM at
position
n
(
n
= 03).
&Z
n
? Displays the phone number stored at position
n (n
= 03).
&ZL? Displays the last executed dial string.
S-Registers
• Default values are appropriate for most users.
The settings are modified with the ATS
r
=
n
command,
where r is the number of the S register and n is a
decimal value between 0 and 255 (unless otherwise
stated).
• Use ATS
r
? to examine the configuration of a
register. For example:
$76"(QWHU
Reg Default Function
S0 0 Sets the number of rings on which to answer
in Auto Answer Mode. When set to 0, Auto
Answer is disabled.
S1 0 Counts and stores the number of rings from
an incoming call. (S0 must be greater than
0).
S2 43 Stores the ASCII decimal code for the es-
cape code character. Default character is
+
.
A value of 128 – 255 disables the escape
code. The range of acceptable values is
country-dependent.
S3 13 Stores the ASCII code for the Carriage
Return character. Valid range is 0–127.
S4 10 Stores the ASCII decimal code for the Line
Feed character. Valid range is 0–127.
S5 8 Stores the ASCII decimal code for the Back-
space character. A value of 128255 disables
the Backspace key’s delete function.