Filter
Top Products
Running the
Print Test
1. Disconnect the power cord at the rear of the printer.
2. Hold down the paper feed button and plug the power
cord back into the printer. Release the feed button when
printing begins. The printer will stop automatically after
printing 100 lines of the U.S. character set.
Removing the
Paper Roll
CAUTION: If you must remove the paper roll, do not pull
the paper out from the back of the printer. This could
damage the feed mechanism. Instead, cut or tear the pa-
per from the rear of the printer. Use the paper feed but-
ton to remove the stub remaining in the feed mechanism.
Cleaning
CAUTION: Never use thinner, trichloroethylene, or ke-
tone based solvents to clean the printer as they may de-
teriorate plastic parts.
1. Remove dirt using a clean cloth dampened with water
and mild soap. Remove stubborn stains with alcohol or
benzine.
2. If necessary use a small vacuum cleaner to remove pa-
per particles and dust from the inside of the printer.
Printer 900 Installation Guide
10