VeriFone 900 Printer User Manual


 
Installing or
Replacing the
Ribbon
Cartridge
1. Remove the ribbon cover by pressing the front tab and
lifting the cover up.
2. If you are replacing an old ribbon, pull up on the lift tab
on the right side of the cartridge (see Figure 6), remove
the cartridge and discard it.
3. Remove the new ribbon
cartridge from its protec-
tive packaging and in-
sert it, left side first, into
the printer. Be sure the
round knob is facing up
and the ribbon fabric fits
between the print head
and the ribbon guide.
4. Press the right side of
the ribbon cartridge into
place (Figure 7). If it
does not fit easily, lift
the cartridge out and try
again. Do not force the
ribbon cartridge into place.
5. Turn the small
knob on the
cartridge clock-
wise to re-
move any
slack.
6. Insert the two
tabs on the
rear of the rib-
bon cover into
the slots on
the printer.
7. Press the front
of the cover
down and snap it into place.
Ribbon
Cover
Figure 7. Replacing the Ribbon Cartridge
Figure 6. Removing the
Ribbon Cartridge
7