Filter
Top Products
10
Unpacking
Please check your shipping carton for the
following items:
• Verilux
®
Rise & Shine Natural Sleep System
• AC power cord
• External FM antenna
• Secure Digital (SD) Card containing natural ambient soundscapes and
wake-up tones. This card can be found in the SD card reader opening (see
number 9 in the image above).
Selecting a location
• Place your Rise & Shine on a table or other fl at surface near your bedside.
• For best performance, place it within two feet of a wall and avoid placing it in
a corner.
• Avoid placing it on a metal surface; this could interfere with FM reception.
• Avoid placing close to heat-radiating products, such as heaters. Do not place
on top of appliances that radiate heat.
• No naked fl ame sources, such as lighted candles, should be placed on this
device.
Connecting to Power
1. Plug the AC power cord into the power connector on the rear panel labeled
120V-60Hz.
2. Plug the other end of the AC power cord into an AC wall outlet.
Connecting an Auxiliary Lamp
If you wish to supplement the Rise & Shine LED light panel with an
auxiliary lamp:
Plug the AC power cord of a lamp with an incandescent bulb
of not more than 100 watts into the Auxiliary Lamp connector
socket on the rear of the Rise & Shine.
Note: ONLY designed to power a lamp, not for use with other
electrical devices.
WARNING: Do not plug any device into this slot other than auxiliary
lamp.
CAUTION: Only use lamps with incandescent bulbs of 100W or lower
as a light supplement with the device.
Setting up Your Rise & Shine
®
m
Front Panel
9