Filter
Top Products
30
Problem What to do
My Rise & Shine
®
does not turn on
or play music.
• Make sure the power cord is fully plugged
into an operating electrical outlet.
• Make sure the Audio Input Selector
is not OFF. See page 11 for further
instructions.
The Brightness Control does not
change the brightness of the LED
light panel or auxiliary lamp.
• Make sure that the light you wish to
control is ON: Go to LIGHT SET on the
display menu and check settings. See
page 21 for further instructions.
• Make sure an auxiliary lamp is plugged
into the Rise & Shine and turned on.
Auxiliary Lamp does not work when
plugged into the Rise & Shine.
• Verify that the lamp switch is turned on.
• The auxiliary lamp bulb may not be
functional. Replace the bulb.
• The lamp may not be enabled in “Light
Set”. Review the instructions on page
21 to enable the lamp.
• You may need to replace the fuse.
Review the instructions on page 29 to
replace the fuse.
LED’s do not work in Wake or Sleep
Set.
• “Top” is not enabled in “Light Set”.
Review the instructions on page 21
under Light Settings.
• “Top” is not enabled in Wake or Sleep
Settings. Reference page 15 under
Light Settings.
The lights just suddenly turned off or
the volume suddenly turned off.
• One hour after the alarm setting time,
if the device is not used, it will turn off.
• Once it is used again, it will turn on.
The screen keeps going dark. I want
it to stop.
• The device is performing in the Sleep
Mode. It is currently set for the display
to be off during this time.
• To stop this mode, turn one of the
middle 3 dials on the front of the unit.
These dials are labeled Brightness,
Mode Select or Volume.
• You need only turn one of the dials.
Troubleshooting