Filter
Top Products
Trouble Shooting Sanitizing Wand
21
Setting and Using LIGHT and DISPLAY SET
T
IME SET
W
AKE SET
S
LEEP SET
A
UDIO SET
L
IGHT SET: LAMP ONLY
DISPLAY SET: LOW
DISPLAY SETTING
LOW
MEDIUM
HIGH
MAIN MENU
TIME SET
WAKE SET
SLEEP SET
AUDIO SET
LIGHT SET: LAMP ONLY
DISPLAY SET: MEDIUM
EXIT
LIGHT SET determines whether the LED light panel, an auxiliary lamp or both
are controlled by the Brightness Control. This allows you to use either or both
light sources during everyday use, at the brightness you wish, when not in Wake
or Sleep mode. Wake and Sleep modes have individual controls for both light
sources.
Light Settings
1. Press the Menu Button.
From the Main Menu:
2. Use the Selector Control Dial to highlight LIGHT
SET: TOP AND LAMP (TOP AND LAMP is the
default setting).
3. Press the Selector Control Dial.
4. From the LIGHT SETTINGS sub-menu, use the Selector
Control Dial to highlight TOP ONLY, LAMP ONLY, TOP
AND LAMP or NONE.
5. Press the Selector Control Dial to choose the highlighted
selection.
The Light Setting is changed and the display returns to the
Main Menu.
The DISPLAY SET item on the Main Menu is used to set the display brightness.
Display Brightness Settings
1. Press the Menu Button.
From the Main Menu:
2. Use the Selector Control Dial to highlight
DISPLAY SET: MEDIUM
(MEDIUM is the default setting).
3. Press the Selector Control Dial.
4. From the DISPLAY SETTINGS sub-menu, use the
Selector Control Dial to highlight LOW, MEDIUM or
HIGH.
5. Press the Selector Control Dial to choose the
highlighted selection.
The display Brightness setting is changed and the display
returns to the Main Menu.
MAIN MENU
TIME SET
WAKE SET
SLEEP SET
AUDIO SET
LIGHT SET: TOP AND LAMP
DISPLAY SET: MEDIUM
EXIT
T
IME SET
W
AKE SET
S
LEEP SET
A
UDIO SET
L
IGHT SET: LAMP ONLY
D
ISPLAY SET: MEDIUM
EXIT
LIGHT SETTINGS
TOP ONLY
LAMP ONLY
TOP AND LAMP
NONE