Filter
Top Products
PoweringtheMiFi2200OnandOff
1. Press the Power LED button until the Power LED lights up solid green.
To power the device off:
1. If the device is plugged into your computing device with the USB Cable,
disconnect/unplug the USB cable from the device first.
2. Press the Power LED button until the Power LED shuts off.
owtousethemicroUSBCable
To properly connect the MiFi 2200 with the microUSB Cable:
Grip the MiFi 2200 by its sides and gently insert the USB Cable into the microUSB port.
Next, insert the other end of the cable in a Type A USB port. The cable should fit easily into
the USB port. The following occurs:
To power the device on:
H
1. The Hardware Icon appears in the taskbar (Windows) or on the Desktop (Mac).
IMPORTANT: When using the device with the microUSB Cable, fully extend the cable so
that the device remains at an appropriate distance. The recommended minimum distance
between you and the device is 8 inches.
Unplugging the MiFi 2200 when Connected with the microUSB Cable
To unplug the MiFi 2200, first terminate your Internet connection session and exit
VZAccess Manager.
Windows
e
your computing device at any time when you are not connected to the network.
To
Stan e Removal
1. End your session by selecting Disconnect from VZAccess Manager.
2. Exit VZAccess Manager to ensure that the MiFi 2200 is powered off.
2. MiFi 2200 begins charging and is powered on automatically.
Th MiFi 2200’s USB technology allows you to safely disconnect the MiFi 2200 device from
safely eject hardware:
dard Unplug/Eject Hardwar
15