Filter
Top Products
• Selected Profile to the Profile you wish to change.
he screen to update with the Wi-Fi settings for the selected profile.
d. Note that for the “Temporary Hotspot” profile,
these settings cannot be changed directly. For this Profile, you can only click
“Generate” to generate new values for the network name (SSID) and security
ick the “Apply”
sing it (make it the current profile).
Wi-Fi t
Each Wi-Fi
these settings cannot be changed directly.
) - The Network Name (also called SSID) of the
ust have a different network name
- Channel – Select the desired channel. If available, the “Auto” setting is
th this setting, the best available channel will be
lly selected. If the “Auto” setting is not available, you can
best results, but normally the
default value will be fine.
ions are
nal/PSK (AES)
k key. The requirements for the network
tion chosen.
II characters or 10 HEX characters.
K (AES) - ASCII string, 8 to 63 characters in length.
Change the
• Wait for t
• Change the settings as desire
key.
• Click the “Update” button to save your changes. Alternatively, cl
button to both update this profile and start u
Se tings
Profile contains the following settings. For the “Temporary Hotspot” profile,
- Network Name (SSID
Selected Profile. Note that each profile m
to avoid confusing wireless clients.
- 802.11 Mode - Select the desired mode.
recommended. Wi
automatica
experiment to see which channel provides the
- Security - For the "Secure" profile, select the desired security method. Use
the most secure method supported by your wireless clients. The opt
listed in order, from least secure to most secure.
• WEP 64-bit
• WEP 128-bit
• WPA Personal/PSK (TKIP)
• WPA2 Perso
- Network Key - Enter the networ
key depend upon the Security op
• WEP 64-bit - 5 ASC
• WEP 128-bit - 13 ASCII characters or 26 HEX characters.
• WPA Personal/PSK (TKIP) - ASCII string, 8 to 63 characters in length.
• WPA2 Personal/PS
26