Filter
Top Products
ConnectingtotheMiFi2200’sMiFiSettings
To connect to the MiFi Settings in the MiFi 2200, follow this procedure:
1. Establish a Wi-Fi connection to the MiFi 2200.
your normal Wi-Fi manager on your computer to establish a Wi-Fi
nection from your computer to the MiFi 2200.
ide for the default values. If you have
ddress” or “Location” bar, enter the address of the MiFi 2200:
Welcome Page
configuration
anges can be made until you login.
The ld is on the top right of the screen. Login requires only a password – there is
e
The Wel ains status information about the MiFi 2200. The status
information is contained in three sections:
Status Bar
Internet
WLAN
1. Status Bar
The Status Bar at the top of the screen contains details of the mobile (3G) network
connection, plus the battery status. The following data is available.
• Signal Strength Image – Indicates the current signal strength for the
mobile network.
• Network Name – The name of the mobile network.
• Network Technology – The type of connection (e.g. EVDO, EVDO Rev A)
• Roaming Indicator – A triangular image is displayed while roaming.
• Connection Status – The current connection status states (Connected,
Connecting, Disconnected, Disconnecting, Dormant, Not Activated).
- Use
con
- The Wi-Fi settings must match those in use on the MiFi 2200. If using the default
settings, refer to the Quick Start Gu
previously changed the default profile on the MiFi 2200, or are using a different
profile, use the values previously set on the MiFi 2200.
2. Open your Web Browser
3. In the “A
- http://192.168.1.1
4. The Welcome Page appears.
T
2
ch
he Welcome page is displayed when your first connect to the MiFi Settings in the MiFi
200, prior to login. This page provides some status information, but no
Login
“Login” fie
no login name.
Us the case-sensitive default password: “admin”.
Status Information
come page cont
22